Scaling requirements for LOADPASS automation.
This sets when the scale needs to be used during the workflow — inbound, outbound, receiving, or all. Scale validation is also set on this page.
Scale Automation Controls
Check Receiving Weight
Select to require transport scaling before and after receiving product for the specified bay.
Check Inbound Weight
Select to require transport scaling before dispensing an order in the specified bay (tare).
Check Outbound Weight
Select to require transport scaling after an order is dispensed in a bay (gross). Requires “Check Inbound Weight” to be enabled for the bay.
Weight Validation
When required, sites are able to enable validation rules. when a weight cannot be validated, drivers will not be able to accept the weight, preventing them from progressing until the issue is resolved.
Tare Weight Range Validation
Prevents drivers from capturing an incorrect tare weight after loading by validating that the tare weight falls within an acceptable range.
Minimum Net Weight Validation
Identifies and prevents extremely low or zero net weights due to improper tare capture by ensuring the calculated net weight (gross - tare) meets minimum requirements.
Further Reading
Still Need Help?
Submit an online web ticket or call us at Kahler Automation 507-235-6648 Option 2.